DFI-ITOX SR100-N Bedienungsanleitung

SR100-NSystem BoardUser’s Manual935-SR1003-050GI02640848

110IntroductionExpansion SlotsTemperatureHumidityPCB• 1 PCI slot for PCI expansion card or customized riser card for 1,2 or 3 PCI slots expansion•0oC

1004Supported SoftwareAudio DriversTo install the driver, click “Audio Drivers” on the main menu.1. Click Next to start theinstallation.2. Follow the

1014Supported SoftwareLAN DriversTo install the driver, click “LAN Drivers” on the main menu.1. Setup is now ready toinstall the driver. ClickNext.2.

1024Supported SoftwareHardware Monitor for WindowsThe Hardware Monitor for Windows utility is capable of monitoring thesystem’s temperature, fan speed

1034Supported Software5. After completing installa-tion, click Finish to exitsetup.4. Click Next to add theprogram icon to theProgram Folder.3. Click

1044Supported Software6. Click Yes if you want tocreate a HardwareDoctor shortcut at yourdesktop.7. Click “Yes, I want torestart my computernow” then

1054Supported SoftwareUsing the Hardware Monitor for Windows Utility1. When you try to run theutility, which is usuallydone by double-clickingthe Hard

1064Supported Software4. You can now access theutility.

1074Supported SoftwareIntel Matrix Storage Manager UtilityIntel Matrix Storage Manager is a utility that allows you to monitor thecurrent status of th

1084Supported Software3. Read the licenseagreement then click Yes.4. Go through the readmedocument for systemrequirements andinstallation tips then cl

1094Supported Software1. Click Next to continue.2. Setup is now ready toinstall. Click Next.Adobe Acrobat Reader 7.0 (English Version)To install, clic

111IntroductionFeaturesThe Watchdog Timer function allows yourapplication to regularly “clear” the system atthe set time interval. If the system hangs

1104Supported Software5. Click Finish to exitinstallaion.4. Click Install to begininstallation.

1114Supported SoftwareInstalling the AHCI Driver During Windows Vista InstallationThe AHCI driver must be installed during Windows® Vista installatio

1124Supported Software4. The screen on the rightwill appear. Select thedriver.

1134Supported SoftwareCreating an AHCI Driver Floppy Diskette under VistaThe system board package includes floppy diskettes which are neededwhen you i

1144Supported SoftwareThe CD that came with the system board contains drivers, utilitiesand software applications required to enhance the performance

1154Supported Software1. Click “I accept the agree-ment” then click Next.Microsoft DirectX 9.0C DriverTo install the driver, click “Microsoft DirectX

1164Supported SoftwareIntel Chipset Software Installation UtilityThe Intel Chipset Software Installation Utility is used for updatingWindows® INF file

1174Supported Software3. Go through the readmedocument for systemrequirements andinstallation tips then clickNext.4. Setup is now installingthe driver

1184Supported SoftwareIntel Graphics DriversTo install the driver, click “Intel Graphics Drivers” on the main menu.1. To start installation, clickNext

1194Supported Software5. Click “Yes, I want torestart this computernow” then click Finish.Restarting the system willallow the new softwareinstallation

112IntroductionSerial ATA is a storage interface that is compliantwith SATA 1.0a specification. With speed of up to3Gbps, it improves hard drive perfo

1204Supported SoftwareAudio DriversTo install the driver, click “Audio Drivers” on the main menu.1. Setup is now ready toinstall the audio driver.Clic

1214Supported SoftwareLAN DriversTo install the driver, click “LAN Drivers” on the main menu.1. Setup is now ready toinstall the driver. ClickNext.2.

1224Supported Software2. Click Next to install orclick Browse to selectanother folder.Hardware Monitor for WindowsThe Hardware Monitor for Windows uti

1234Supported Software3. Click Next to add theprogram icon to theProgram Folder.4. After completing installa-tion, click Finish to exitsetup.5. Click

1244Supported Software6. Click “Yes, I want torestart my computernow” then click Finish.Restarting the system willallow the driver to takeeffect.

1254Supported Software1. Setup is now ready toinstall the utility. ClickNext.2. Read the Warning infor-mation carefully then clickNext.Intel Matrix St

1264Supported Software3. Read the licenseagreement then click Yes.4. Go through the readmedocument for systemrequirements andinstallation tips then cl

1274Supported SoftwareAHCI for F6 During Windows Setup Floppy DriverThis is used to create a floppy driver diskette needed when you installWindows® XP

1284Supported Software1. Click Next to continue.2. Setup is now ready toinstall. Click Next.Adobe Acrobat Reader 7.0 (English Version)To install, clic

1294Supported Software5. Click Finish to exitinstallaion.4. Click Install to begininstallation.

113IntroductionThis function allows you to use the PS/2 key-board or PS/2 mouse to power-on the sys-tem.Important:The 5V_standby power source of your

1304Supported SoftwareInstalling the AHCI Driver During Windows XP InstallationThe AHCI driver must be installed during the Windows® XPinstallation us

131AWatchdog TimerAppendix A - Watchdog TimerWatchdog TimerThe following parameters are references for setting the time intervalof the Watchdog Timer

132AWatchdog TimerMOV DX,SIO_CON_PORTMOV AL,0F5H ;WATCH DOG CONTROL REGISTEROUT DX,ALMOV DX,SIO_DATA ;BIT1 DIS/EN WDTO# OUTPUT LOW PULSETO KBRST#PIN(0

B133TroubleshootingTroubleshooting ChecklistThis chapter of the manual is designed to help you with problemsthat you may encounter with your personal

B134TroubleshootingThe picture seems to be constantly moving.1. The monitor has lost its vertical sync. Adjust the monitor’s verticalsync.2. Move away

B135TroubleshootingHard DriveHard disk failure.1. Make sure the correct drive type for the hard disk drive hasbeen entered in the BIOS.2. If the syste

B136TroubleshootingKeyboardNothing happens when a key on the keyboard was pressed.1. Make sure the keyboard is properly connected.2. Make sure there a

137CFrequently Asked QuestionsAppendix C - Frequently Asked QuestionsQ1: Black screen appeared when uninstalling the Windows Vista graphicsdriver.A1:

138CFrequently Asked QuestionsA2: Disconnect the USB floppy drive for 15 seconds then reconnect it tothe motherboard. Execute F6FLPY.EXE again.Click

139DHot Keys for Graphics DisplayAppendix D - Hot Keys for Graphics DisplayThe integrated graphics driver provides hot keys that allows ease inadjusti

142Hardware InstallationSystem Board LayoutChapter 2 - Hardware InstallationComponent SideNote:The DVI-I port supports DVI-D signal only.

152Hardware InstallationSODIMM 1 is a 90o socket located beneath SODIMM 2.Solder Side

162Hardware InstallationSystem MemoryWarning:When the DRAM Power LED lit red, it indicates that power ispresent on the DDR2 sockets. Power-off the PC

172Hardware InstallationBIOS SettingConfigure the system memory in the Chipset menu of the BIOS.Refer to chapter 3 for more information.The system boa

182Hardware InstallationInstalling the DIM ModuleNote:The system board used in the following illustrations may notresemble the actual one. These illus

192Hardware Installation7. To install another SODIMM, locate the SODIMM 1 socket on thesystem board.8. Insert the module into the socket at an approxi

CopyrightThis publication contains information that is protected by copyright.No part of it may be reproduced in any form or by any means orused to ma

202Hardware Installation10. Push down the module until the clips at each end of the socketlock into position. You will hear a distinctive “click”, ind

212Hardware InstallationCPUOverviewThe system board is equipped with a surface mount mPGA478PCPU socket.Note:The system board used in the following il

222Hardware Installation5. Position the CPU above the socket. The gold triangular mark onthe CPU must align with pin 1 of the CPU socket.Important:Han

232Hardware InstallationInstalling the Fan and Heat SinkThe CPU must be kept cool by using a CPU fan with heat sink.Without sufficient air circulation

242Hardware Installation2. Apply a thin layer of thermal paste on top of the CPU. Do notspread the paste all over the surface. When you later place th

252Hardware InstallationImportant:When you install the CPU fan and heat sink assembly, makesure the assembly is positioned in such a way that the dire

262Hardware InstallationJumper SettingsClear CMOS DataIf you encounter the following,a) CMOS data becomes corrupted.b) You forgot the supervisor or us

272Hardware InstallationJP6 is used to select the power of the PS/2 keyboard/mouse port.Selecting 5V_standby will allow you to use the PS/2 keyboard o

282Hardware InstallationJP4 (for USB 0-3) and JP2 (for USB 4-7) are used to select thepower of the USB ports. Selecting 5V_standby will allow you to u

292Hardware Installation121211LCD/Inverter SettingsXJP3JP3 is used to select the power supplied to the LCD panel and toconfigure the inverter.Importan

FCC and DOC Statement on Class BThis equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of

302Hardware InstallationLCD Brightness Control (Voltage Level Adjust)Use J7 to connect to the LCD Brightness Control button of theLCD Display Panel. I

312Hardware InstallationCOM 1 and COM 2 are RS-232 ports. If the serial deviceconnected to COM 1 and/or COM 2 requires 5V/12V power fromthe system boa

322Hardware InstallationPower-on SelectJP14 is used to select the method of powering on the system. If youwant the system to power-on whenever AC powe

332Hardware InstallationRear Panel I/O PortsThe rear panel I/O ports consist of the following:• PS/2 mouse port• PS/2 keyboard port• 2 COM ports• VGA

342Hardware InstallationPS/2 Mouse and PS/2 Keyboard PortsThese ports are used to connect a PS/2 mouse and a PS/2 key-board. The PS/2 mouse port uses

352Hardware Installation• BIOS Setting:Configure the PS/2 keyboard/mouse wake up function in theAdvanced menu of the BIOS. Refer to chapter 3 for more

362Hardware InstallationSerial PortsThe serial ports are RS-232 asynchronous communication ports with16C550A-compatible UARTs that can be used with mo

372Hardware InstallationVGA PortThe VGA port is used for connecting a VGA monitor. Connect themonitor’s 15-pin D-shell cable connector to the VGA port

382Hardware InstallationDVI-I PortDVI-IWThe DVI-I port is used to connect an LCD monitor. This port sup-ports DVI-D signal only.Connect the display de

392Hardware InstallationRJ45 Fast-Ethernet PortThe LAN ports allow the system board to connect to a local areanetwork by means of a network hub.BIOS S

Table of ContentsAbout this Manual...Warranty...

402Hardware InstallationUniversal Serial Bus ConnectorsUSB allows data exchange between your computer and a widerange of simultaneously accessible ext

412Hardware InstallationDriver InstallationYou may need to install the proper drivers in your operating systemto use the USB device. Refer to your ope

422Hardware InstallationAudioRear AudioThe system board is equipped with 3 audio jacks. A jack is a one-hole connecting interface for inserting a plug

432Hardware InstallationFront AudioThe front audio connector allows you to connect to the second line-out and mic-in jacks that are at the front panel

442Hardware InstallationI/O ConnectorsCD-in Internal Audio ConnectorThe CD-in connector is used to receive audio from a CD-ROMdrive, TV tuner or MPEG

452Hardware InstallationS/PDIF ConnectorThe S/PDIF connector is used to connect an external S/PDIF port.Your S/PDIF port may be mounted on a card-edge

462Hardware InstallationLVDS LCD Panel ConnectorLCD/Inverter Power ConnectorLCD AUX Power ConnectorThe system board allows you to connect a LCD Displa

472Hardware InstallationPins8765Function+12V+12VPanel Backlight On/Off Control+3.3VPins4321FunctionPanel PowerPanel Inverter Brightness Voltage Contro

482Hardware InstallationXDigital I/O ConnectorThe Digital I/O connector provides powering-on function to an ex-ternal device that is connected to this

492Hardware InstallationSerial ATA ConnectorsThe Serial ATA ports are used to connect Serial ATA devices. Con-nect one end of the Serial ATA cable to

About this ManualAn electronic file of this manual is included in the CD. To view theuser’s manual in the CD, insert the CD into a CD-ROM drive. Theau

502Hardware InstallationIDE Disk Drive ConnectorsThe 40-pin IDE connector is used to connect hard drives. To preventimproper IDE cable installation, t

512Hardware InstallationAdding a Second IDE Disk DriveWhen using two IDE drives, one must be set as the master and theother as the slave. Follow the i

522Hardware InstallationCooling Fan ConnectorsConnect the CPU fan’s cable connector to the CPU fan connectoron the system board. The system fan connec

532Hardware InstallationChassis Instrusion ConnectorThe system board supports the chassis intrusion detection function.Connect the chassis intrusion s

542Hardware InstallationPower ConnectorConnect a 20-pin ATX main power connector from the power sup-ply unit to the ATX connector. The system board re

552Hardware InstallationDRAM Power LEDThis LED will light when the system’s power is on.Standby Power LEDThis LED will light when the system is in the

562Hardware InstallationFront Panel ConnectorsHDD-LED - HDD LEDThis LED will light when the hard drive is being accessed.RESET SW - Reset SwitchThis s

572Hardware InstallationPCI SlotYou can install a PCI expansion card or a customized riser carddesigned for 1, 2 or 3 PCI slots expansion (for low pro

582Hardware InstallationThe lithium ion battery powers the real-time clock and CMOSmemory. It is an auxiliary source of power when the main power issh

593BIOS SetupAward BIOS Setup UtilityThe Basic Input/Output System (BIOS) is a program that takes careof the basic level of communication between the

16IntroductionStatic Electricity PrecautionsIt is quite easy to inadvertently damage your PC, system board,components or devices even before installin

603BIOS SetupDateThe date format is <day>, <month>, <date>, <year>. Day displaysa day, from Sunday to Saturday. Month displays

613BIOS SetupIDE Auto-DetectionDetects the parameters of the drive. The parameters will automati-cally be shown on the screen.Extended IDE DriveIf you

623BIOS SetupCapacityDisplays the approximate capacity of the disk drive. Usually the sizeis slightly greater than the size of a formatted disk given

633BIOS SetupVideoThis field selects the type of video adapter used for the primarysystem monitor. Although secondary monitors are supported, you dono

643BIOS SetupExtended MemoryDisplays the amount of extended memory detected during boot-up.Total MemoryDisplays the total memory available in the syst

653BIOS SetupAdvanced BIOS FeaturesThe Advanced BIOS Features allows you to configure your systemfor basic operation. Some entries are defaults requir

663BIOS SetupCPU FeatureThis field is used to configure the CPU that is installed on the sys-tem board. Move the cursor to this field then press <E

673BIOS SetupVirus WarningThis field protects the boot sector and partition table of your harddisk drive. When this field is enabled, the Award BIOS w

683BIOS SetupQuick Power On Self TestThis field speeds up Power On Self Test (POST) after you power onthe system. When Enabled, the BIOS will shorten

693BIOS SetupSecurity OptionThis field determines when the system will prompt for the password- everytime the system boots or only when you enter the

17IntroductionAbout the PackageThe system board package contains the following items. If any ofthese items are missing or damaged, please contact your

703BIOS SetupAdvanced Chipset FeaturesThis section gives you functions to configure the system based onthe specific features of the chipset. The chips

713BIOS SetupOn-Chip Frame Buffer SizeThis field is used to select the onboard VGA’s frame buffer size thatis shared from the system memory.DVMT ModeT

723BIOS SetupIntegrated PeripheralsThe settings on the screen are for reference only. Your version may not beidentical to this one.OnChip IDE DeviceMo

733BIOS SetupIDE HDD Block ModeEnabled The IDE HDD uses the block mode. The system BIOSwill check the hard disk drive for the maximum blocksize the sy

743BIOS SetupThe settings on the screen are for reference only. Your version may not beidentical to this one.Phoenix - AwardBIOS CMOS Setup UtilityOnb

753BIOS SetupPower On FunctionThis field allows you to use the keyboard or PS/2 mouse to power-on the system.Button only Default setting. Uses the pow

763BIOS SetupAny Key Press any key to power-on the system.Keyboard 98 When this option is selected, press the “wake up”key of the Windows® 98 compatib

773BIOS SetupPWRON After PWR-FailOff When power returns after an AC power failure, thesystem’s power is off. You must press the Power but-ton to power

783BIOS SetupUSB 1.0 ControllerThis field is used to enable or disable the Universal Host ControllerInterface (USB 1.0).USB 2.0 ControllerThis field i

793BIOS SetupPower Management SetupThe Power Management Setup allows you to configure your systemto most effectively save energy.The settings on the s

18IntroductionProcessorChipsetSystem MemoryBIOSEnergy EfficientDesignDamage FreeIntelligenceAudioChapter 1 - Introduction• Intel® CoreTM2 Duo mobile p

803BIOS Setupton. Push and release again in less than 4 sec torestore. Pushing the power button for more than 4seconds will power off the system.Insta

813BIOS SetupDate (of Month) Alarm0 The system will power-on everyday according to thetime set in the “Time (hh:mm:ss) Alarm” field.1-31 Select a date

823BIOS SetupPnP/PCI ConfigurationsThis section shows how to configure the PCI bus system. It coverssome very technical items and it is strongly recom

833BIOS SetupPCI/VGA Palette SnoopThis field determines whether the MPEG ISA/VESA VGA cards canwork with PCI/VGA or not. The default value is Disabled

843BIOS SetupPC Health StatusCurrent System Temp to 5VSB (V)These fields will show the temperature, fan speed and output voltageof the monitored devic

853BIOS SetupFrequency/Voltage ControlThe settings on the screen are for reference only. Your version may not beidentical to this one.Auto Detect PCI

863BIOS SetupLoad Fail-Safe DefaultsThe “Load Fail-Safe Defaults” option loads the troubleshooting de-fault values permanently stored in the ROM chips

873BIOS SetupLoad Optimized DefaultsThe “Load Optimized Defaults” option loads optimized settings fromthe BIOS ROM. Use the default values as standard

883BIOS SetupSet Supervisor PasswordIf you want to protect your system and setup from unauthorizedentry, set a supervisor’s password with the “System”

893BIOS SetupSet User PasswordIf you want another user to have access only to your system butnot to setup, set a user’s password with the “System” opt

19IntroductionGraphicsLANSerial ATAIDERear Panel I/OPortsI/O Connectors• Internal graphics feature- Mobile Intel® Graphics Media Accelerator X3100- Dy

903BIOS SetupSave & Exit SetupWhen all the changes have been made, highlight “Save & Exit Setup”and press <Enter>.Type “Y” and press <

913BIOS SetupExit Without SavingWhen you do not want to save the changes you have made, high-light “Exit Without Saving” and press <Enter>.Type

923BIOS SetupUpdating the BIOSTo update the BIOS, you will need the new BIOS file and a flashutility, AWDFLASH.EXE. Please contact technical support o

933BIOS Setup6. The following will appear.Do You Want to Save BIOS (Y/N)This question refers to the current existing BIOS in your system.We recommend

944Supported SoftwareChapter 4 - Supported SoftwareThe CD that came with the system board contains drivers, utilitiesand software applications require

954Supported Software2. Read the licenseagreement then click Yes.Intel Chipset Software Installation UtilityThe Intel Chipset Software Installation Ut

964Supported Software3. Go through the readmedocument for systemrequirements andinstallation tips then clickNext.4. Setup is now installingthe driver.

974Supported SoftwareIntel Graphics DriversTo install the driver, click “Intel Graphics Drivers” on the main menu.1. Setup is now ready toinstall the

984Supported Software2. Read the licenseagreement then click Yes.3. Go through the readmedocument for systemrequirements andinstallation tips then cli

994Supported Software4. Setup is now installingthe driver. Click Next tocontinue.5. Click “Yes, I want torestart this computernow” then click Finish.R